Features

Rear Parking Sensor System: Pioneer's ND-PS1 rear parking sensor system is designed to be connected directly to Pioneer's SPH-10BT digital media receiver (sold separately). When connected, you can back in and out of a parking spot easier and safer thanks to the audio and visual illumination warnings on the Pioneer SPH-10BT in-dash receiver. Additionally, when used in conjunction with Pioneer's SPH-10BT and the Pioneer Smart Sync App (for Apple iOS 11.0+ and Android OS 5.0+), you can also experience the parking assist display on your compatible smartphone screen. The Pioneer ND-PS1 rear parking sensor system consists of a hide-away module, four parking sensors, a 16.5' system cable, 39" power/ground harness, 19mm hole-saw bit, hook-n-loop fastener, and cable-ties.

Parking Sensor Warnings: The ND-PS1 rear parking sensor system provides audio and visual warnings on the Pioneer SPH-10BT receiver and the Pioneer Smart Sync App on your compatible Apple iOS and Android OS smartphone device. The audio warnings will be heard through your vehicle's speakers, while the visual warnings will be displayed either on the Pioneer SPH-10BT's front-panel LCD screen or the LCD touchscreen of your compatible smartphone using the Pioneer Smart Sync App. As your vehicle moves in reverse, the approximate distance warning will change.

Hide-Away Module w/ System Cable: The included hide-away module is not waterproof and must be installed inside the vehicle. A hook-and-loop fastener is supplied to mount the module. The module also features integrated mounting flanges that allow you to secure the module in place with screws (mounting screws are not included). The main system cable measures 16.5' and is plugged into the "Data" port of the hide-away module and the 4-pin port on back of the Pioneer SPH-10BT receiver. Make sure to choose a mounting location inside your vehicle for the hide-away module that is adequate for the length of the system cable (16.5' total) and parking sensor cables (8' total). The hide-away module measures 4.1875" (w) x 0.875" (h) x 3.0" (d).

4 Parking Sensors: All 4 parking sensors will mount to the rear bumper of your vehicle and are IP67 waterproof rated. A 19mm hole-saw bit is included to flush-mount the parking sensors in your vehicle's bumper (a minimum of 1" in depth behind the bumper's surface is required to mount the sensors). The parking sensors must be mounted between 1.8125' and 2.125" from the ground. The parking sensors should be mounted 1.3125" apart and aligned with the center of the bumper (see Instruction Manual for diagram). Each sensor has an attached 6" cable and detachable 7.5' that plugs into the hide-away module. Make sure the sensors are plugged into the appropriate two-pin ports (labeled "A", "B", "C", and "D") on the module in relation to the mounting location on your vehicle's bumper (see Instruction Manual for more diagram). The outer diameter of each parking sensor is 1.0".

• The sensors will not work when installed in metal bumpers or when they are painted.
• Do not attempt to shorten or lengthen the attached or detachable cables of the parking sensors.

Power/Ground Harness: The 3-pin connector of the power/ground harness plugs into the module's "Power" port, while the Red wire connects to your vehicle's parking brake circuit (12V+) and the Black wire is grounded to your vehicle's metal chassis.